This is a fan site, not the official website.
DCID-1015 Cordless Impact Driver - 画像1

DCID-1015 Cordless Impact Driver

Model: DCID-1015
JAN Code: 4954008985608
¥19,800
In Stock

Purchase

View on Amazon

Product Description

Lightweight and compact easy-to-hold impact driver. With LED light, stepless variable speed/brake, approximately 45-minute charging time, belt hook and strap included.

Features

LED light, stepless variable speed/brake, approximately 45-minute charging time, belt hook and strap included, lightweight compact body, maximum torque 120N·m

Detailed Description

Lightweight and compact cordless impact driver with easy-to-hold design. Maximum tightening torque of 120N·m enables tightening of wood screws φ4.2×65mm. LED light illuminates work area for safe operation in dark places. Equipped with stepless variable speed function and brake for detailed work. Powered by 10.8V 1.5Ah lithium-ion battery with approximately 45-minute rapid charging capability. Can tighten approximately 80 wood screws per full charge (at ambient temperature 20°C). Includes belt hook and hand strap for portability and work safety. Forward/reverse switch allows easy rotation direction change.

Specifications

AccessoriesBattery pack, Charger, Bit (PH2×65mm 1pc), Belt hook
Battery Capacity1.5Ah
Battery ModelLBP-1015A
Battery TypeLithium-ion
Battery VoltageDC 10.8V
Battery Weight0.23kg
Charger Cord Length1.8m
Charger Frequency50/60Hz
Charger Input Capacity50VA
Charger ModelLBC-1015
Charger VoltageAC 100V
Charger Weight0.26kg
Charging CyclesApprox. 300 times
Charging Temperature Range10℃-30℃
Charging TimeApprox. 45 minutes
Compatible BitsHex shank 6.35mm (1/4 inch)
Dimensions132×65×206mm (L×W×H)
Impact Number0-3,000min⁻¹
Impact Rate0-3,000min⁻¹
Included BitPH2×65mm 1pc
JAN Code4954008985608
Mass (body only)0.85kg
Max Torque120N·m
ModelDCID-1015
MotorDC Motor
Motor Voltage10.8V
No-load Speed0-2,200min⁻¹
Screw Capacity4.2×65mm
Screw Tightening CapacityWood screw φ4.2×65mm
Total Weight1.08kg (with battery)
Usage CategoryHousehold use
Voltage10.8V
Warranty Period6 months from date of purchase
Weight0.85kg (body only)

Manual

Battery Pack Installation: Slide the battery pack onto the main unit, align it and insert firmly. Insert securely until you hear a lock sound and confirm it is set properly. To remove, press the stopper while sliding forward. Charging Method: Plug the charger power plug into the outlet. Insert the battery pack firmly without pressing the stopper button until you hear a lock sound. Charging is complete in approximately 45 minutes. Pull out the battery pack while pressing the stopper button. Charger Lamp Display: Green lamp lit (before charging, charger plugged in), Red lamp lit (charging, currently charging), Green lamp lit (charging complete, charging finished). Belt Hook: The belt hook attached to the tool can be mounted on either left or right side. Hand Strap: Holding the tool with the hand strap prevents accidental dropping. Use the hand strap to prevent tool failure and floor damage from dropping.
Switch operation: Pull the switch lightly for low-speed rotation, pull further to increase speed. The forward/reverse switch changes rotation direction. LED light illuminates when switch is pulled, lighting the tip area. To attach bits, pull the sleeve forward, insert the bit, and return the sleeve.